Swiper demo

wall covering

Artikelnummer:  72017

Wall covering protects against moisture and rot - Hammerglass

Hammerglass wall coverings offer an excellent and functional alternative to traditional sheet metal coverings. Hammerglass Wall Caps are non-conductive and are manufactured from black, UV resistant Hammerglass which can be fitted to both existing and newly produced fencing and barrier solutions.

Non-conductive wall coverings

For obvious safety reasons, sheet metal is completely unsuitable for noise barriers, fences and barriers along railway lines. A dropped power line that makes contact with the sheet metal can electrify the entire route, with devastating consequences. In this situation, Hammerglass Wall Coping is an ideal solution to protect the underlying wood structure from moisture and rot.

  • Not energized
  • Light weight
  • Long estimated useful life
  • Minimal maintenance
  • Inexpensive

Construction and installation

Bespoke construction with design and dimensions according to customer requirements. Hammerglass Wall Coping is manufactured from 4mm black UV resistant Hammerglass which can be fitted to both existing and newly produced fencing and barrier solutions. Installation follows Hammerglass instructions.

Additional product information Wall Covering - Hammerglass

Supplier: Hammerglass AB

CERTIFICATIONS

Hammerglass has undergone a long series of tests to ensure the material's strength and performance meets all burglary, ballistic and blast protection requirements. Hammerglass AB is ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified as well as PPAP for the automotive industry.

Intrusion protection

Hammerglass is certified according to the European standard EN 356 with security class P8B, which corresponds to the highest protection class for security grilles and roller shutters. To qualify for this protection class, the material must withstand 70 ax blows. It is worth noting that when the test was completed, after 72 strokes, the ax still had not punched a hole in the Hammerglass sheet.

Fire

Bulletproof glass is certified according to the European standard EN 1063. The different levels of protection are indicated by the classes BR1 to BR7, where BR1 is the lowest and BR7 is the highest protection class. The most common protection classes are BR4 and BR6. Hammerglass Ballistic Protection has been tested by the Beschussamt Ulm in Germany and certified with protection classes BR4-NS and BR6-NS (No Splinter).

Explosion

A series of tests on Hammerglass panels has been carried out in accordance with EN 13124-2 at SP (Technical Research Institute of Sweden) in Borås. Hammerglass panels in different formats were mounted in different steel frames. Then seven explosions were carried out from a distance of 3 and 5 meters respectively. As a result, 12 mm Hammerglass panels were found to withstand the blast generated by detonating 3 kg of TNT from a distance of 3 meters.

CLASS PROTECTION TEST PRODUCT
P2A Smash and Grab Dropped metal sphere, 3 m height, x3 SafeCoat 12 Mil
P3A Vandalism/Smash and Grab Dropped metal sphere, 6 m height, x3 Hammerglass 4mm - 4.8kg/m2
P4A Vandalism/Smash and Grab Dropped metal sphere, 9 m height, x3 Hammerglass 4mm - 4.8kg/m2
P5A Vandalism/Smash and Grab Dropped metal sphere, 9 m height, x9 Hammerglass 6mm - 7.2kg/m2
P6B Break ins 30 ax blows Hammerglass 6mm - 7.2kg/m2
P7B Break ins 50 ax blows Hammerglass 6mm - 7.2kg/m2
P8B Break ins 70 ax blows Hammerglass 8mm - 9.6kg/m2
P8B Break ins 70 ax blows HMG INSULATE 6mm (HG06-12-4.41)
BR1-NS Bullet resistance Handgun
Rifle .22Long
HMG RABS 12mm + 4mm ScreenSaver screen
BR4-NS Bullet resistance Handgun .357 Magnum HMG BR4NS 23mm - 54kg/m2
BR6-NS Bullet resistance Handgun 7.62x51mm HMG BR6NS 39mm - 90kg/m2
EXR1 Explosion 3kg TNT at 5m distance Hammerglass 12mm - 14.4kg/m2
EXR2 Explosion 3 kg TNT at 3 m distance Hammerglass 12mm - 14.4kg/m2