Model 47 Tension / Compression Universal Load Cell
Our load cell or our SLC47 force sensor is a device that converts load or force into an electrical signal.
The SLC47 load cell should be mounted on a hard, flat surface. Tension / compression load cells measure the force exerted on the central thread of the load cell.
It must be ensured that the force transducer of the model SLC47 is not subjected to any load or force that exceeds its capacity. The selected range of the model SLC47 tensile / compressive force transducer (universal force transducer) should therefore be suitable for the maximum force (including transient forces) that can be exerted on it.
The SLC47 transducer is a strain gauge transducer and has an mV output which may require an amplifier. For the SLC47 we can offer a variety of high-quality, low-noise and high-precision strain gage amplifiers.
Additional information about the product Model 47 Tension / Compression Universal Load Cell
Supplier : RDP Electronics Ltd
|Transducer environment||clean / dry, damp|
|Transducer type||sprung, guided, unguided|
|Transducer Range||15mm, 20mm, 25mm, 30mm, 50mm, 100mm, 150mm, 200mm, 300mm, 400mm, 500mm, 760mm, 940mm|
|Temp. min.||0 ° C, -10 ° C, -20 ° C|
|Temp. max.||60 ° C, 70 ° C, 80 ° C, 100 ° C, 125 ° C, 200 ° C|
|Radiation||Normal, <20Gy, <10kGy, <1MGy|