Swiper demo

MA110 incremental encoder

Artikelnummer:  63114

MA110 incremental encoder

Incremental encoder for speed control or for use in motion control applications.

Properties of the MA110 incremental encoder

The series is available with a high resolution between 1 and 5000 pulses per revolution. The mechanical interface of the MA110 series is compatible with European standards and uses a synchro flange for assembly. The series has a robust design with reverse polarity protected power supply and short-circuit proof outputs.

Additional information about the product MA110 Incremental Encoder

Supplier : EMETA Encoders AG

Functions of the encoder Speed ​​feedback Relative positioning application Length, diameter & direction measurments
Area of ​​application Electrical motors Environments without exceptinal demands of robustness.
Encoder type Incremental encoder
Outside diameter 58 mm
Shaft dimension 4 mm round, 6 mm round, 6 mm with flattening, 8 mm round, 10 mm round, 10 mm with flattening, 11 mm key way
Flange type Synchro flange
Supply voltage 5 Vdc | 5 - 30 Vdc | 7 - 35 Vdc
Electrical interface TTL | HTL
Number of channels 6 channels (A, B & 0-pulse differential)
electrical connection Cable | 6 pin MS | 8 pin KTP | 8 pin M12 | 12 pin Con FM (M23 type)
Chock 200g
Range temperature -40 ° C - + 80C
Vibration 20g at 20-2000 Hz
Shaft Type Solid shaft
Connection direction Axial, Radial
Material Anodized aluminum

Documents on the product MA110 Incremental Encoder