Swiper demo

Model LFH-7i Compression Load Cell

Artikelnummer:  50038-SLC-LFH7I00250

Model LFH-7i Compression Load Cell

Our SLC-LFH7I load cell or force sensor is a device that converts load or force into an electrical signal.
The SLC-LFH7I load cell should be mounted on a hard, flat surface. This load cell measures the compressive force that is exerted between the top and bottom of the load cell.
It must be ensured that the force transducer of the model SLC-LFH7I is not subjected to any load or force that exceeds its capacity. The selected area of ​​the model SLC-LFH7I compression force transducer should therefore be suitable for the maximum force (including transient forces) that can be exerted on it.
The SLC-LFH7I transducer is a strain gauge transducer and has an mV output which may require an amplifier. For the SLC-LFH7I we can offer a variety of high quality, low-noise and high-precision strain gage amplifiers.

Additional information on the product Model LFH-7i Compression Load Cell

Supplier : RDP Electronics Ltd

Transducer environment moist, submersible
Transducer Output LVDT
Transducer type sprung, guided, unguided
Transducer Range 15mm, 20mm, 25mm, 30mm, 50mm, 100mm, 150mm, 200mm, 300mm, 400mm, 500mm, 760mm, 940mm
Temp. min. 0 ° C, -10 ° C, -20 ° C, -40 ° C
Temp. max. 60 ° C, 70 ° C, 80 ° C, 100 ° C, 125 ° C, 200 ° C
Radiation Normal, <20Gy, <10kGy, <1MGy

Documents about the product Model LFH-7i Compression Load Cell

Please ask us for the data sheet.