Swiper demo

Non-contact safety switches

  Lagerbestand gering. Lieferzeit auf Anfrage.
Artikelnummer:  66108-940144

Non-contact coded safety switch certified according to EN ISO 14119, type 4

Non-contact coded safety switches are designed for use on protective doors, sliding protective grilles or protective covers, as they are found in numerous applications, e.g. on machine tools or on flaps in the food industry. Opening the door automatically leads to the safe shutdown of the system.

Type safety contacts/outputs (closer) Auxiliary contacts / outputs (NC contacts) Temp range Width in mm
ZCode-LC 2 1 -25°C to +80°C 88x25x13mm
ZCode-TC 2 1 -25°C to +80°C 36x26x13mm
ZCode-PC 2 1 -25°C to +80°C 50x25x13mm
ZCode-CC 2 1 -25°C to +80°C 85x20x17mm
ZCode-RC 2 1 -25°C to +80°C D30 x L60mm

All safety switches in the ZCode series work contact-free using a coded magnet system with a large switching distance and large tolerance to offset on the protective door. Activation can only take place with the actuator included in the scope of delivery. The switching status is indicated by an LED.

The main advantage compared to mechanical safety switches is the simple installation, the small design and the high level of protection against dirt and moisture. In addition, they work wear-free and thus minimize maintenance costs.

ZANDER safety switches are characterized by their high level of protection against manipulation. They are TÜV type-tested and can be used up to the highest security level PL e.

They are completely dust and water-proof (IP 67/69K). The difference lies in the different housing designs. The ZCode E series (see the section on coded stainless steel safety switches), for example, has a stainless steel housing for increased temperature requirements or when high chemical resistance to environmental influences is required.

In addition, due to the higher hygiene requirements, they are predestined for use in the Food (packaging) industry!

Additional information on the product non-contact safety switches

Supplier: Hermann ZANDER GmbH & Co. KG

Scope of delivery: see standard equipment. Please inquire about optional or other equipment.

Documents for the product non-contact safety switches

Please ask us for the data sheet.