- description
- Additional Information
- Documents
MA240 incremental encoder
Incremental encoder with continuous hollow shaft for speed control, motion feedback or relay positioning.
Properties of the MA240 incremental encoder
High resolution and accuracy enable the MA240 encoder series to be used in electric motors and / or generators. The MA240 encoders can easily be mounted on small to medium-sized AC / DC motors and servo motors. Due to the hollow shaft design of the encoder, commissioning time and costs can be reduced significantly compared to using full shaft encoders. The hollow shaft construction allows the encoder to "drive" on the extended motor shaft without the need for additional support mechanisms.
The series supports standardized mechanical and electrical instruction interfaces such as TTL, HTL.
Additional information on the product MA240 incremental encoder
Supplier :
| Functions of the encoder | Speed feedback Velocity control Relative positioning Length, direction & acceleration measurements |
|---|---|
| Area of application | Electrical motors & generators Environments without exceptional demands on robustness |
| Encoder type | Incremental encoder |
| Outside diameter | 58 mm |
| Shaft dimension | 8 mm round, 10 mm round, 12 mm round, 14 mm round |
| Flange type | Hollow flange |
| Supply voltage | 5 Vdc | 5 - 30 Vdc | 7 - 35 Vdc |
| Electrical interface | TTL | HTL |
| Number of channels | 6 channels (A, B & 0-pulse differential) |
| electrical connection | Cable | 8 pin M12 | 12 pin Con FM (M23 type) |
| Chock | 200g |
| Range temperature | -40 ° C - + 80C |
| Vibration | 20g at 20-2000 Hz |
| Shaft Type | Hollow shaft through |
| Connection direction | Radial |
| Material | Anodized aluminum |
Data sheet MA240 Incremental Encoder